Preparar el archivo PDF para descargarlo
Preparar el archivo PDF para descargarlo
Descargar el archivo de la hoja de datos en formato PDF
Descargar PDF
Preparar el archivo PDF para descargarlo
Preparar el archivo PDF para descargarlo
Descargar el archivo de la hoja de datos en formato PDF
Descargar PDF
Vulcan Seals Type 40D
Teléfono: +44 (0) 114 249 3333
Correo electrónico: contact@vulcanseals.com

Vulcan Seals Type 40D

Hoja de datos técnicos

Descripción del producto

A highly proficient, widely utilised, ‘O’-ring mounted, shaft directional dependent, conical spring mechanical seal. jj

Supplied as standard with a solid Stainless Steel head and a Carbon Type 12 stationary seat to suit non-DIN housing dimensions.

The head is an inserted design if a Carbide face is specified; all stationaries are monolithic.

¿Por qué elegir el Vulcan Seals Tipo 40D?

  • Diseño compacto avanzado con perfil radial estrecho que cumple con las cámaras de sellado DIN24960/EN12756 L1K-U con sistema antirrotación.
  • Muy adecuado para aplicaciones con alto contenido de sólidos debido a su perfil exterior liso y a los resortes protegidos de la exposición al medio.
  • El rotativo Vulcan Seals Type 40 presenta diseños de caras diferenciales para carbono y carburos de silicio o tungsteno más duros para garantizar un rendimiento óptimo.
  • Múltiples muelles para una carga frontal uniforme, aislados del producto, evitan que se obstruyan. Los muelles en C de Hastelloy® vienen de serie para ofrecer la máxima resistencia a la corrosión y una vida útil máximas.
  • La junta estática en forma de anillo en forma de «O» de mayor diámetro no se irrita ni daña el manguito del eje y se puede sellar en manguitos del eje que antes estaban ligeramente desgastados por otras juntas o empaques de prensacos.

Combinaciones de materiales frontales estándar

Cara giratoria
Cara estacionaria
Código de sello completo
Acero inoxidable 304Carbono VCP1P
Elastómeros en stock garantizados: VitonTM/FKM, EP y nitrilo
Metalurgia en stock garantizada: 304 SS Especifique la bobina en el sentido de las agujas del reloj a la derecha o en el sentido contrario a las agujas del reloj a la izquierda al realizar el pedido
*Garantía sin stock

Capacidades de temperatura de elastómeros

Mínimo
Máximo
Nitrilo-30 °C+120 °C
Presión:
Hasta 14 bar (203 psi)

Mechanical Seal Replacement Range

Vulcan Seals Tip 40D es un sello mecánico de reemplazo dimensional para los siguientes rangos de sellos:

  • Burgmann® | Type HJ92/G9*
  • Burgmann® | Type HJ97/G9*
  • John Crane® | Type 50/248X*

*Cara giratoria | **Cara estacionaria

Disfrute de la excelencia: servicio, calidad y valor de Vulcan
Sellos mecánicos | Anillos en forma de «O» encapsulados en FEP/PFA | Empaquetado con prensaestopas | Juntas de PTFE expandido
Reino Unido/Mundo: +44 (0) 114 249 3333 | EE. UU.: +1 952 955 8800 | www.vulcanseals.com | contact@vulcanseals.com
Teléfono: +44 (0) 114 249 3333
Correo electrónico: contact@vulcanseals.com

Datos dimensionales

DØ (métrico)Código de tallaD1D4DINS L1DINL L2Ancho de ranura DINLProfundidad de ranura DINL
10010021,0016,426,6010,004,005,00
12012023,0018,426,6010,004,005,00
14014025,0020,426,6010,004,005,00
16016027,0022,426,6010,004,005,00
18018033,0026,67,5011,504,005,50
20020035,0028,67,5011,504,005,50
22022037,0030,67,5011,504,005,50
24024039,0032,67,5011,504,005,50
25025040,0033,67,5011,504,005,50
28028043,0036,67,5011,504,005,50
30030045,0038,67,5011,504,005,50
32032048,0041,667,5011,504,005,50
33033048,0041,667,5011,504,005,50
35035050,0043,87,5011,504,005,50
38038056,0048,89,0014,005,005,50
40040058,0050,89,0014,005,005,50
43043061,0053,89,0014,005,005,50
45045063,0055,89,0014,005,005,50
48048066,0058,89,0014,005,005,50
50050070,0061,259,5015,005,005,50
53053073,0064,2511,0015,005,005,50
55055075,0066,2511,0015,005,005,50
58058078,0069,2511,0015,005,005,50
60060080,0071,2511,0015,005,005,50
63063083,0074,2511,0015,005,005,50
65065085,0076,2511,0015,005,005,50
68068090,0080,511,3018,005,005,50
70070092,0082,611,3018,005,005,50
75075097,0087,611,3018,005,005,50
800800105,0094,712,0018,205,005,50
850850110,0099,714,0018,205,005,50
900900115,00104,714,0018,205,005,50
950950120,00109,714,0017,205,005,50
1001000125,00114,714,0017,205,005,50
DØ (Imperial)DØ (métrico)Código de tallaD3L1No de tornillos de fijación
enmmenmm
0,37500950,74819,000,2957,503 x 120°
1001000,74819,000,2957,503 x 120°
1201200,82721,000,2957,503 x 120°
0,501270,82721,000,2957,503 x 120°
1401400,90623,000,2957,503 x 120°
1501500,94524,000,2957,503 x 120°
0,62501580,98425,000,2957,503 x 120°
1601600,98425,000,2957,503 x 120°
1801801,2231,000,2957,503 x 120°
0,7501911,2231,000,2957,503 x 120°
2002001,29933,000,2957,503 x 120°
2202201,37835,000,2957,503 x 120°
0,87502221,37835,000,2957,503 x 120°
2402401,45737,000,2957,503 x 120°
2502501,49638,000,34910,003 x 120°
102541,49638,000,34910,003 x 120°
2802801,61441,000,34910,003 x 120°
1,12502861,61441,000,34910,003 x 120°
3003001,69343,000,34910,003 x 120°
1,2503171,77245,000,34910,003 x 120°
3203201,77245,000,39410,003 x 120°
3303301,81146,000,39410,003 x 120°
1,37503491,8948,000,39410,003 x 120°
3503501,8948,000,39410,003 x 120°
3803802,08753,000,39410,003 x 120°
1,503812,08753,000,39410,003 x 120°
4004002,16555,000,39410,003 x 120°
1,62504122,16555,000,39410,003 x 120°
4304302,28358,000,39410,003 x 120°
1,7504442,36260,000,39410,003 x 120°
4504502,36260,000,39410,003 x 120°
1,87504762,4863,000,39410,003 x 120°
DØ (Imperial)DØ (métrico)Código de tallaD3L1No de tornillos de fijación
enmmenmm
484802,4863,000,39410,003 x 120°
505002,55965,000,39410,003 x 120°
2.0005082,55965,000,39410,003 x 120°
535302,67768,000,39410,003 x 120°
2,1255392,67768,000,39410,003 x 120°
555502,75670,000,39410,003 x 120°
2,2505712,75670,000,39410,003 x 120°
585803,03177,000,39410,003 x 120°
606003,1179,000,39410,003 x 120°
2,3756033,1179,000,39410,003 x 120°
2.5006353,22882,000,39410,003 x 120°
656503,30784,000,47212,003 x 120°
2,6256663,30784,000,47212,003 x 120°
686803,42587,000,47212,003 x 120°
2,7506983,50489,000,47212,003 x 120°
707003,50489,000,47212,003 x 120°
2,8757303,7495,000,47212,003 x 120°
757503,85898,000,47212,003 x 120°
3.0007623,85898,000,47212,003 x 120°
3,1257944,055103,000,47212,003 x 120°
808004,055103,000,47212,003 x 120°
3,2508254,055103,000,47212,003 x 120°
858504,252108,000,47212,003 x 120°
3,3758574,252108,000,47212,003 x 120°
35008894,449113,000,47212,003 x 120°
909004,449113,000,47212,003 x 120°
3,625*9214,449113,000,47212,003 x 120°
95*9504,646118,000,47212,003 x 120°
3,750*9534,646118,000,47212,003 x 120°
3,875*9844,764121,000,47212,003 x 120°
100*10004,843123,000,47212,003 x 120°
4.000*10164,843123,000,5915,003 x 120°
DØ (métrico)Código de tallaTipo 8STDTipo 8BTipo 12Tipo 12DINTipo 13Tipo 13DIN
D1L1D1L1D1L1D1L1D1L1
10010019,206,6019,207,1018,105,5021,007,0018,105,5021,007,00
110110--------20,605,50----20,605,50----
12012021,605,6021,607,6020,605,5023,007,0020,605,5023,007,00
130130--------23,106,00----23,106,00----
14014024,605,6024,607,6023,106,0025,007,0023,106,0025,007,00
15015024,606,6024,608,6026,907,00----26,907,00----
16016028,007,5028,009,0026,907,0027,007,0026,907,0027,007,00
170170--------26,907,00----26,907,00----
18018030,008,0030,0010,0030,908,0033,0010,0030,908,0033,0010,00
19019031,007,5031,009,0030,908,00----30,908,00----
20020035,007,5035,009,5030,908,0035,0010,0030,908,0035,0010,00
210210--------35,408,00----35,408,00----
22022035,007,5035,009,5035,408,0037,0010,0035,408,0037,0010,00
230230--------35,408,00----35,408,00----
24024038,007,5038,009,5035,408,0039,0010,0035,408,0039,0010,00
25025038,007,5038,009,5038,208,5040,0010,0038,208,5040,0010,00
26026040,008,0040,0010,0038,208,50------------
28028042,009,0042,0011,0043,309,0043,0010,0043,309,0043,0010,00
30030045,0010,5045,0011,0043,309,0045,0010,0043,309,0045,0010,00
32032048,0010,5048,0011,0043,309,0048,0010,0043,309,0048,0010,00
33033050,0011,00----53,5011,5048,0010,0053,509,0048,0010,00
35035052,0011,0052,0011,5053,5011,5050,0010,0053,5011,5050,0010,00
38038055,0010,3055,0011,5060,5011,5056,0013,0060,5011,5056,0013,00
40040058,0010,8058,0011,5060,5011,5058,0013,0060,5011,5058,0013,00
42042062,0012,0062,0014,3060,5011,50------------
43043062,0012,0062,0014,3060,5011,5061,0013,00--------
440440--------65,5011,50------------
45045064,0011,6064,0014,3065,5011,5063,0013,00--------
48048068,4011,6068,4014,3065,5011,5066,0013,00--------
50050069,3011,6069,3014,3072,5011,5070,0014,00--------
530530------------73,0014,00--------
55055075,4013,3075,4015,3072,5011,5075,0014,00--------
58058078,4013,3078,4015,30----78,0014,00--------
60060080,4013,3080,4015,3079,3011,5080,0014,00--------
630630------------83,0014,00--------
65065085,4013,0085,4015,3084,5011,5085,0014,00--------
68068091,5013,7091,5016,00----90,0016,00--------
70070092,0013,0092,0015,3089,5011,5092,0016,00--------
75075099,0014,0099,0015,3094,5011,5097,0016,00--------
800800104,0015,00104,0016,3099,5011,50105,0018,00--------
850850109,0014,80----105,5013,50110,0018,00--------
900900114,0014,80----111,5013,50115,0018,00--------
950950120,3015,80----116,5013,50120,0018,00--------
1001000123,3015,80----119,5013,50125,0018,00--------
Tipo 21Tipo 31
DØ (Imperial)DØ (métrico)Código de tallaD1L1D1L1
enmmenmmenmmenmm
0,3751000950,96924,600,3448,740,81220,620,3127,93
1201201,09427,790,3448,74--------
0,50001271,09427,790,3448,74125,10,3127,93
0,6251601581,21930,950,40610,321,2531,750,40510,28
18*01801,34434,150,40610,32--------
0,7501901911,34434,150,40610,321,37534,930,40510,28
20*02001,40635,700,40610,32--------
0,8752202221,46937,300,40610,321,538,10,40610,32
1.0002502541,59440,500,40610,321,62541,280,43711,1
2802801,87547,630,47211,99--------
1,12502861,87547,630,47211,991,7544,440,43711,1
30*03002.00050,800,47211,99--------
1,2503203172.00050,800,47211,991,87547,630,43711,1
33*03302,12553,980,47211,99--------
1,3753503492,12553,980,47211,99250,80,43711,1
1.5003803812,25057,150,47211,992,12553,980,43711,1
40*04002,37560,330,47211,99--------
1,62504122,37560,330,47211,992,37560,330,512,7
43*04302.50063,500,47211,99--------
1,7504504442.50063,500,47211,992,563,50,512,7
1,8754804762,62566,680,47211,992,62566,680,512,7
5005002,75069,850,53113,50--------
2.00005082,75069,850,53113,502,7569,850,512,7
5305302,87573,030,53113,50--------
2,12505392,87573,030,53113,50376,20,56214,28
55*05503.00076,200,53113,50--------
2,25005713.00076,200,53113,503,12579,380,56214,28
2,3756006033,12579,380,53113,503,2582,550,56214,28
2.50006353,25082,550,53113,503,37585,730,56214,28
65*06503,62592,080,62515,88--------
2,62506663,62592,080,62515,883,37585,730,62515,88
2,7507006983,75095,250,62515,883.588,90,62515,88
2,87507303,87598,430,62515,883,7595,250,62515,88
75*07504.000101,600,62515,88--------
3.00007624.000101,600,62515,883,87598,430,62515,88
3,125*80*07944,375111,130,78319,884101,60,78319,88
3,250*08254,500114,300,78319,884,125104,780,78319,88
3,375*85*08574,625117,480,78319,884,25107,950,78319,88
3.500*90*08894,750120,650,78319,884,375111,130,78319,88
3,625*09214,875123,830,78319,884,5114,30,78319,88
3,750*95*09535.000127,000,78319,884,625117,480,78319,88
3,875*09845,125130,170,78319,88--------
100*10004,875123,830,78319,88--------
4.000*10165,250133,350,78319,884,875123,830,78319,88
DØ (Imperial)Código de tallaD2D3L1L2Ranura P.C.D.Tamaño del anillo en O
enmmenmmenmmenmmenmm
0,500*01270,54313,800,99625,300,3117,900,0982,500,78019,80BS214
0,625*01580,66916,981,24631,650,40610,300,0982,500,95324,20BS218
0,750*01910,79320,151,37134,820,40610,300,0982,501,09327,75BS220
0,875*02220,91923,331,49638,000,40610,300,0982,501,22031,00BS222
1.00002541,04326,501,62141,180,43911,150,0982,501,34334,10BS223
1,12502861,18430,081,74644,350,43911,150,0982,501,46937,30BS224
1,25003171,30933,251,87147,530,43911,150,0982,501,59440,50BS225
1,37503491,43436,431,99650,700,43911,150,0982,501,71743,60BS226
1.50003811,55939,602,12153,880,43911,150,0982,501,84346,80BS227
1,62504121,68442,782,37160,230,50212,750,1183,002,03151,60BS229
1,75004441,80945,952,49663,400,50212,750,1183,00215754,80BS230
1,87504761,93449,132,62166,580,50212,750,1183,00228057,90BS231
2.00005082,05952,302,74669,750,50212,750,1183,002,40661,10BS232
2,12505392,18455,482,99676,100,56414,330,1383,502,59465,90BS234
2,25005712,30958,653,12179,280,56414,330,1383,502,71769,00BS235
2,37506032,43461,833,24682,450,56414,330,1383,502,84372,20BS236
2.50006352,55965,003,37185,630,56414,330,1383,502,96975,40BS237
2,62506662,68468,183,37185,630,62715,930,1383,503,03177,00BS237
2,75006982,80971,353,49688,800,62715,930,1383,503,15780,20BS238
2,87507302,93474,533,74695,150,62715,930,1383,503,34384,90BS240
3.00007623,05977,703,87198,330,62715,930,1383,503,46988,10BS241
3,125*07943,22581,923,996101,500,78119,840,1383,503,59491,30BS242
3,250*08253,35085,104,121104,680,78119,840,1383,503,71794,40BS243
3,375*08573,47588,274,246107,850,78119,840,1383,503,84397,60BS244
3.500*08893,60091,444,371111,030,78119,840,1383,503,969100,80BS245
3,625*09213,72594,624,496114,200,78119,840,1383,504,094104,00BS246
3,750*09533,85097,794,621117,380,78119,840,1383,504,217107,10BS247
3,875*09843,975100,974,746120,550,78119,840,1383,504,343110,30BS248
4.000*10164100104,144,871123,730,78119,840,1383,504,469113,50BS249
DØ (Imperial)Código de tallaD1D2L1L2PIN PCDPIN Ø
enmmenmmenmmenmmenmmenmm
0,500*01271.00025,400,54313,800,3137,950,1122,850,68717,460,07902,00
0,62501581,25031,750,66916,980,40510,280,1574,000,81320,640,07902,00
0,750*01911,37534,930,79220,120,40510,280,1574,000,93723,810,07902,00
0,87502221.50038,100,91923,330,40510,280,1574,001,06326,990,07902,00
1.00002541,62541,281,04326,500,43711,100,1614,101,18730,150,07902,00
1,12502861,75044,441,18430,080,43711,100,1614,101,31333,350,07902,00
1,25003171,87547,631,30933,250,43711,100,1614,101,43736,500,07902,00
1,37503492.00050,801,43536,450,43711,100,1614,101,56339,700,07902,00
1.50003812,12553,981,55939,600,43711,100,1614,101,68742,850,07902,00
1,62504122,37560,331,68442,780,50012,700,1654,201,87547,630,11803,00
1,75004442.50063,501,80945,950,50012,700,1654,202.00050,800,11803,00
1,87504762,62566,681,93449,130,50012,700,1654,202,12553,980,11803,00
2.00005082,75069,852,05952,300,50012,700,1654,202,25057,150,11803,00
2,12505393.00076,202,18455,480,56214,280,1774,502,37560,330,11803,00
2,25005713,12579,382,30958,650,56214,280,1774,502.50063,500,11803,00
2,37506033,25082,552,43861,930,56214,280,1774,502,62566,680,11803,00
2.50006353,37585,732,55965,000,56214,280,1774,502,75069,850,11803,00
2,62506663,37585,732,68468,180,62515,880,1734,402,87573,030,11803,00
2,750*0698350088,902,80971,350,62515,880,1734,403.00076,200,11803,00
2,87507303,75095,252,93474,530,62515,880,1734,403,12579,380,11803,00
3.00007623,87598,433,05977,700,62515,880,1734,403,25082,550,11803,00
3,12507944.000101,603,22581,920,78319,880,1774,50337685,750,11803,00
3,25008254,125104,783,35085,090,78319,880,1774,50350088,900,11803,00
3,37508574,250107,953,47588,270,78319,880,1774,503,62492,050,11803,00
350008894,375111,133,60091,440,78319,880,1774,503,75095,250,11803,00
3,62509214,500114,303,72594,620,78319,880,1774,503,87498,400,11803,00
3,75009534,625117,483,85097,790,78319,880,1774,504.000101,600,11803,00
3,87509844,750120,653,975100,970,78319,880,1774,504,125104,780,11803,00
4.00010164,875123,834100104,140,78319,880,1774,504,250107,950,11803,00
DØ (Imperial)DØ (métrico)Código de tallaTipo 11Tipo 20Tipo 19BTipo 24
D1L1D1L1D1L1D1L1
enmmenmmenmmenmm
0,37500950,87522,230,3127,930,96924,60,3448,74--------
1001000,87522,230,3127,930,96924,60,3448,7421,006,6021,008,60
1201201.00025,400,3127,931,09427,790,3448,7423,006,6023,008,60
0,50001271.00025,400,3127,931,09427,790,3448,74--------
1301301.00025,400,3127,931,09427,790,3448,74--------
1401401,25031,750,40510,281,21930,950,40610,3225,006,6025,008,60
150150--------1,21930,950,40610,3227,006,6027,008,60
0,62501581,25031,750,40510,281,21930,950,40610,32--------
1601601,25031,750,40510,281,21930,950,40610,3227,006,6027,008,60
1801801,37534,930,40510,281,34434,150,40610,3233,007,5033,0010,00
0,75001911,37534,930,40510,281,34434,150,40610,32--------
2002001.50038,100,40510,281,40635,70,40610,3235,007,5035,0010,00
2202201.50038,100,40510,281,46937,30,40610,3237,007,5037,0010,00
0,87502221.50038,100,40510,281,46937,30,40610,32--------
2402401,62541,280,43711,101,59440,50,40610,3239,007,5039,0010,00
2502501,62541,280,43711,101,59440,50,40610,3240,007,5040,0010,00
102541,62541,280,43711,101,59440,50,40610,32--------
2802801,75044,440,43711,101,87547,630,47211,9943,007,5043,0010,00
1,12502861,75044,440,43711,101,87547,630,47211,99--------
3003001,87547,630,43711,10250,80,47211,9945,007,5045,0010,00
1,25003171,87547,630,43711,10250,80,47211,99--------
3203201,87547,630,43711,10250,80,47211,9948,007,5048,0010,00
3303302.00050,800,43711,102,12553,980,47211,9948,007,5048,0010,00
1,3753503502.00050,800,43711,102,12553,980,47211,9950,007,5050,0010,00
1.5003803802,12553,980,43711,102,2557,150,47211,9956,009,0056,0011,00
4004002,37560,330,50012,702,37560,330,47211,9958,009,0058,0011,00
1,62504122,37560,330,50012,702,37560,330,47211,99--------
4304302.50063,500,50012,702,563,50,47211,9961,009,0061,0011,00
1,75004442.50063,500,50012,702,563,50,47211,99--------
4504502,62566,680,50012,702,563,50,47211,9963,009,0063,0011,00
1,87504762,62566,680,50012,702,62566,680,47211,99--------
4804802,75069,850,50012,702,62566,680,47211,9966,009,0066,0011,00
5005002,75069,850,50012,702,7569,850,53113,570,009,5070,0013,00
205082,75069,850,50012,702,7569,850,53113,5--------
5305303.00076,200,56214,282,87573,030,53113,573,0011,0073,0013,00
2,12505393.00076,200,56214,282,87573,030,53113,5--------
5505503,12579,380,56214,28376,20,53113,575,0011,0075,0013,00
2,25005713,12579,380,56214,28376,20,53113,5--------
5805803,25082,550,56214,283,12579,380,53113,578,0011,0078,0013,00
6006003,25082,550,56214,283,12579,380,53113,580,0011,0080,0013,00
2,37506033,25082,550,56214,283,12579,380,53113,5--------
6306303,37585,730,56214,283,2582,550,53113,5----83,0013,00
2,506353,37585,730,56214,283,2582,550,53113,5--------
6506503,37585,730,62515,883,62592,080,62515,8885,0011,0085,0013,00
2,6256663,37585,730,62515,883,62592,080,62515,88--------
2,750698350088,900,62515,883,7595,250,62515,88--------
70700350088,900,62515,883,7595,250,62515,8892,0011,3092,0015,30
2,8757303,75095,250,62515,883,87598,430,62515,88--------
757503,87598,430,62515,884101,60,62515,8897,0011,3097,0015,30
3.0007623,87598,430,62515,884101,60,62515,88--------
3,1257944.000101,600,78319,884,375111,130,78319,88--------
80800--------4,5114,30,78319,88105,0012,00105,0015,70
3,2508254,125104,780,78319,884,5114,30,78319,88--------
DØ (Imperial)DØ (métrico)Código de tallaD1D2D3L1L2
enmmenmmenmmenmmenmm
0,5001201271,14429,050,53913,701,56339,700,68517,400,3117,90
1501501,25631,900,63016,001,61441,000,68517,400,3117,90
0,6251601581,30133,040,66116,801,72043,690,68517,400,3117,90
0,7501901911,42636,210,78720,001,83146,500,68517,400,3117,90
2002001,45336,900,82721,001,85047,000,68517,400,3117,90
0,8752202221,55139,390,91323,201,94949,500,68517,400,3117,90
2502501,65041,901,02426,002,04752,000,68517,400,3117,90
1.00002541,67642,561,03926,402,06752,500,68517,400,3117,90
1,1252802861,80145,741,16529,602,30358,501,05926,900,43711,10
3003001,91748,691,22031,002,31358,751,05926,900,43711,10
1,25003171,98850,501,28732,702.50063,501,05926,900,43711,10
33*03302,05952,301,33934,002,55965,001,05926,900,43711,10
1,3753503492,11353,681,41736,002,57965,501,05926,900,43711,10
1.500380381223856,851,53939,102,73669,501,05926,900,43711,10
4004002,43761,901,61441,002,95375,001,05926,900,43711,10
1,62504122,48863,201,66142,203,01276,501,05926,900,43711,10
1,75004442,63066,381,78745,403,13079,501,05926,900,43711,10
4504502,63466,901,81146,00315080,001,05926,900,43711,10
1,8754804762,73869,551,92949,003,24882,501,05926,900,43711,10
5005002,83171,902,00851,00334685,001,05926,900,43711,10
2.00005082,86372,732,03951,803,36685,501,05926,900,43711,10
2,12505393,11379,082,16154,903,76095,501,31233,330,56314,30
55*05503,14679,902,20556,003,78096,001,31233,330,56314,30
2,2500571323882,252,28758,103,87898,501,31233,330,56314,30
6006003,34384,902,40261,003,976101,001,31233,330,56314,30
2,3750603336300085,432,41361,303,996101,501,31233,330,56314,30
2.50006353,48888,602,53964,504,114104,501,31233,330,56314,30
65*06503,53989,90259866,004,173106,001,31233,330,56314,30
2,62506663,61391,782,66167,604,272108,501,31233,330,56314,30
2,7507006983,73694,902,79571,004,370111,001,31233,330,56314,30
2,87507303,86398,132,91374,004508114,501,31233,330,56314,30
75*07503,93399,902,99276,004,567116,001,31233,330,56314,30
3.00007623,92699,713,03977,205,547115,501,31233,330,56314,30
3,125*07944,051102,893,16580,404,705119,501,31233,330,56314,30
80*08004,130104,90318981,004,764121,001,31233,330,56314,30
3,250*08254232107,503,29583,704,862123,501,35034,300,56314,30
85*08504,327109,90338686,004,961126,001,35034,300,56314,30
3,375*08574,364110,853,42186,905,020127,501,35034,300,56314,30
3.500*08894,488114,003,53989,905138130,501,35034,300,56314,30
90*09004508114,503,58391,005138130,501,35034,300,56314,30
3,625*09214,610117,103,67393,305,256133,501,35034,300,56314,30
95*09504,720119,903,78096,005354136,001,35034,300,56314,30
3,750*09534,738120,353,79196,305374136,501,35034,300,56314,30
100*10004,917124,903,976101,005,551141,001,35034,300,56314,30
4.000*10164,988126,704,039102,605,610142,501,35034,300,56314,30
4,250*10795238133,054291109,005,886149,501,35034,300,56314,30
4,500*11435,488139,404,539115,306,122155,501,35034,300,56314,30
5.000*12706,488164,805,039128,007,3882187,501,41736,000,63016,00
5,500*13976,988177,505,539140,707,894200,501,41736,000,63016,00
*Garantía sin stock
Teléfono: +44 (0) 114 249 3333
Correo electrónico: contact@vulcanseals.com

Presión máxima de operación

The PV chart shows the maximum operating pressuresof this Vulcan seal type based on the seal face materialsused. Different lines on the chart indicate different materialcombinations, as shown underneath.

It also assumes stable operation in a clean, cool, lubricatingand non-volatile fluid with an adequate flush rate.

For more in-depth pressure rating calculations based onspecific material combinations and application conditions,please consult us.

Gráfico fotovoltaico

Condiciones de solicitud

Criterios
Multiplicador
Fluido de producto
Líquidos lubricantes
X 1,00
Soluciones acuosas/Agua
X 0,85
Temperatura
Por debajo de 70 °C (158 °F)
X 1,00
71 °C a 120 °C (160 °F a 248 °F)
X 0,85
De 121 °C a 175 °C (de 250 °F a 347 °F)
X 0,75
Más de 176 °C (349 °F)
X 0,60
Velocidad
Hasta 1750 rpm
X 1,00
1750 a 3600 rpm
X 0,80

Materiales para la cara y el asiento

Combinación
Multiplicador
Acero inoxidable vs carbonox 0,30

Ejemplo de cálculo para Vulcan Seals Type 40D

A. Tamaño del eje: 1 pulgada, por lo que la presión es de 12 bar (según la tabla fotovoltaica)
B. Medios: agua (multiplicador = 0,85)
C. Temperatura: 50 °C (multiplicador = 1,00)
D. Velocidad: 1450 rpm (multiplicador = 1,00) E. Combinación de caras: acero inoxidable frente a carbono (multiplicador = 0,30)

Para este tamaño de sello de tipo 12 en particular, el cálculo de la presión operativa máxima de guía aproximada sería:


A x B x C x D x E12 bar x 0,85 x 1,00 x 1,00 x 0,30 = 3,06 bar

Solo orientación

Tenga en cuenta que, debido a las numerosas variables operativas y de aplicación que afectan al rendimiento del sello, la información que se proporciona en esta página es solo orientativa.

Por lo tanto, recomendamos encarecidamente realizar pruebas y controles individuales cuidadosos de todos los sellos y equipos relacionados para cualquier aplicación propuesta. Nuestra política es la de una mejora técnica y de eficiencia continua.

Por lo tanto, todas las especificaciones pueden estar sujetas a cambios sin previo aviso.

®™ Todos los nombres de productos, marcas y marcas comerciales que se muestran son propiedad de sus respectivos propietarios, tienen únicamente fines de identificación y no implican afiliación ni aprobación.
** Importante: Estos límites son las limitaciones teóricas del elastómero o del diseño. Para conocer la presión operativa teórica máxima para su tamaño y aplicación específicos, consulte el ejemplo de cálculo incluido en esta hoja de datos. Toda la información sobre el rendimiento proporcionada es únicamente orientativa y depende de los factores materiales, operativos y de aplicación que afectan al rendimiento del sello.
Disfrute de la excelencia: servicio, calidad y valor de Vulcan
Sellos mecánicos | Anillos en forma de «O» encapsulados en FEP/PFA | Empaquetado con prensaestopas | Juntas de PTFE expandido
Reino Unido/Mundo: +44 (0) 114 249 3333 | EE. UU.: +1 952 955 8800 | www.vulcanseals.com | contact@vulcanseals.com
Vulcan Seals Tipo 40D

Vulcan Seals Tipo 40D

Vulcan Seals Type 40D
Burgmann® - Type HJ92/G9
John Crane® - Type 50/248X
Burgmann® - Type HJ97/G9

El Vulcan Seals Tipo 40D es un diseño de sello robusto, de perfil estrecho, montado en forma de anillo en forma de «O», con varios muelles y una cara giratoria insertada balanceada hidráulicamente. Los Vulcan Seals Tipo 40D cumplen totalmente con las dimensiones de la norma DIN24960/EN12756 L1K-U. La transmisión desde el eje y la longitud de trabajo de la junta se aprietan mediante tornillos de fijación con la llave Allen suministrada. Los tornillos de fijación proporcionan una capacidad de rotación bidireccional.

El conjunto de muelles múltiples y el perfil de la cara giratoria proporcionan fuerzas de cierre y equilibrio hidráulico uniformes, lo que mejora la capacidad fotovoltaica, un mayor rendimiento de sellado y una mayor vida útil del sello en aplicaciones industriales desafiantes en comparación con los diseños de sellos de un solo resorte.

El Vulcan Seals Tipo 40D se suministra con un anillo fijo tipo 24 DINL montado en un anillo en forma de «O» para la mayoría de los tamaños de eje, a fin de proporcionar un rendimiento óptimo en fluidos de alto par, como medios viscosos y con alto contenido de sólidos.

¿Por qué elegir el Vulcan Seals Tipo 40D?

  • Diseño compacto avanzado con perfil radial estrecho que cumple con las cámaras de sellado DIN24960/EN12756 L1K-U con sistema antirrotación.
  • Muy adecuado para aplicaciones con alto contenido de sólidos debido a su perfil exterior liso y a los resortes protegidos de la exposición al medio.
  • El rotativo Vulcan Seals Type 40 presenta diseños de caras diferenciales para carbono y carburos de silicio o tungsteno más duros para garantizar un rendimiento óptimo.
  • Múltiples muelles para una carga frontal uniforme, aislados del producto, evitan que se obstruyan. Los muelles en C de Hastelloy® vienen de serie para ofrecer la máxima resistencia a la corrosión y una vida útil máximas.
  • La junta estática en forma de anillo en forma de «O» de mayor diámetro no se irrita ni daña el manguito del eje y se puede sellar en manguitos del eje que antes estaban ligeramente desgastados por otras juntas o empaques de prensacos.
Solicita una cotización

Solicita una cotización

Al enviar este formulario, usted proporciona voluntariamente su información personal. Para obtener información detallada sobre la gestión y la confidencialidad de sus datos, consulte nuestra Política de privacidad. Al continuar, usted reconoce y acepta el almacenamiento y la utilización de los datos proporcionados.
¡Gracias! ¡Su presentación ha sido recibida!
¡Uy! Algo salió mal al enviar el formulario.

Especificaciones

Combinaciones de materiales frontales estándar

‍

‍

Compliance & Certificates

No items found.

The Vulcan Seals mechanical seal range can be supplied with material combinations designed to meet the compliance standards and certifications listed above. Additional compliance or regulatory requirements can also be considered upon request. Please enquire to discuss your specific application.

Combinaciones de materiales frontales estándar

Elastómeros en stock garantizados: VitonTM/FKM, EP y nitrilo
Metalurgia en stock garantizada: 304 SS Especifique la bobina en el sentido de las agujas del reloj a la derecha o en el sentido contrario a las agujas del reloj a la izquierda al realizar el pedido
*Garantía sin stock

‍

‍

Capacidades de temperatura de elastómeros

Mínimo
Máximo
Nitrilo-30 °C+120 °C

Capacidades de presión

Presión:
Hasta 14 bar (203 psi)

Datos dimensionales

Vulcan Seals Tipo 40D
Texto debajo de la tabla de datos dimensionales
DØ (métrico)Código de tallaD1D4DINS L1DINL L2Ancho de ranura DINLProfundidad de ranura DINL
10010021,0016,426,6010,004,005,00
12012023,0018,426,6010,004,005,00
14014025,0020,426,6010,004,005,00
16016027,0022,426,6010,004,005,00
18018033,0026,67,5011,504,005,50
20020035,0028,67,5011,504,005,50
22022037,0030,67,5011,504,005,50
24024039,0032,67,5011,504,005,50
25025040,0033,67,5011,504,005,50
28028043,0036,67,5011,504,005,50
30030045,0038,67,5011,504,005,50
32032048,0041,667,5011,504,005,50
33033048,0041,667,5011,504,005,50
35035050,0043,87,5011,504,005,50
38038056,0048,89,0014,005,005,50
40040058,0050,89,0014,005,005,50
43043061,0053,89,0014,005,005,50
45045063,0055,89,0014,005,005,50
48048066,0058,89,0014,005,005,50
50050070,0061,259,5015,005,005,50
53053073,0064,2511,0015,005,005,50
55055075,0066,2511,0015,005,005,50
58058078,0069,2511,0015,005,005,50
60060080,0071,2511,0015,005,005,50
63063083,0074,2511,0015,005,005,50
65065085,0076,2511,0015,005,005,50
68068090,0080,511,3018,005,005,50
70070092,0082,611,3018,005,005,50
75075097,0087,611,3018,005,005,50
800800105,0094,712,0018,205,005,50
850850110,0099,714,0018,205,005,50
900900115,00104,714,0018,205,005,50
950950120,00109,714,0017,205,005,50
1001000125,00114,714,0017,205,005,50
DØ (Imperial)DØ (métrico)Código de tallaD3L1No de tornillos de fijación
enmmenmm
0,37500950,74819,000,2957,503 x 120°
1001000,74819,000,2957,503 x 120°
1201200,82721,000,2957,503 x 120°
0,501270,82721,000,2957,503 x 120°
1401400,90623,000,2957,503 x 120°
1501500,94524,000,2957,503 x 120°
0,62501580,98425,000,2957,503 x 120°
1601600,98425,000,2957,503 x 120°
1801801,2231,000,2957,503 x 120°
0,7501911,2231,000,2957,503 x 120°
2002001,29933,000,2957,503 x 120°
2202201,37835,000,2957,503 x 120°
0,87502221,37835,000,2957,503 x 120°
2402401,45737,000,2957,503 x 120°
2502501,49638,000,34910,003 x 120°
102541,49638,000,34910,003 x 120°
2802801,61441,000,34910,003 x 120°
1,12502861,61441,000,34910,003 x 120°
3003001,69343,000,34910,003 x 120°
1,2503171,77245,000,34910,003 x 120°
3203201,77245,000,39410,003 x 120°
3303301,81146,000,39410,003 x 120°
1,37503491,8948,000,39410,003 x 120°
3503501,8948,000,39410,003 x 120°
3803802,08753,000,39410,003 x 120°
1,503812,08753,000,39410,003 x 120°
4004002,16555,000,39410,003 x 120°
1,62504122,16555,000,39410,003 x 120°
4304302,28358,000,39410,003 x 120°
1,7504442,36260,000,39410,003 x 120°
4504502,36260,000,39410,003 x 120°
1,87504762,4863,000,39410,003 x 120°
DØ (Imperial)DØ (métrico)Código de tallaD3L1No de tornillos de fijación
enmmenmm
484802,4863,000,39410,003 x 120°
505002,55965,000,39410,003 x 120°
2.0005082,55965,000,39410,003 x 120°
535302,67768,000,39410,003 x 120°
2,1255392,67768,000,39410,003 x 120°
555502,75670,000,39410,003 x 120°
2,2505712,75670,000,39410,003 x 120°
585803,03177,000,39410,003 x 120°
606003,1179,000,39410,003 x 120°
2,3756033,1179,000,39410,003 x 120°
2.5006353,22882,000,39410,003 x 120°
656503,30784,000,47212,003 x 120°
2,6256663,30784,000,47212,003 x 120°
686803,42587,000,47212,003 x 120°
2,7506983,50489,000,47212,003 x 120°
707003,50489,000,47212,003 x 120°
2,8757303,7495,000,47212,003 x 120°
757503,85898,000,47212,003 x 120°
3.0007623,85898,000,47212,003 x 120°
3,1257944,055103,000,47212,003 x 120°
808004,055103,000,47212,003 x 120°
3,2508254,055103,000,47212,003 x 120°
858504,252108,000,47212,003 x 120°
3,3758574,252108,000,47212,003 x 120°
35008894,449113,000,47212,003 x 120°
909004,449113,000,47212,003 x 120°
3,625*9214,449113,000,47212,003 x 120°
95*9504,646118,000,47212,003 x 120°
3,750*9534,646118,000,47212,003 x 120°
3,875*9844,764121,000,47212,003 x 120°
100*10004,843123,000,47212,003 x 120°
4.000*10164,843123,000,5915,003 x 120°
DØ (métrico)Código de tallaTipo 8STDTipo 8BTipo 12Tipo 12DINTipo 13Tipo 13DIN
D1L1D1L1D1L1D1L1D1L1
10010019,206,6019,207,1018,105,5021,007,0018,105,5021,007,00
110110--------20,605,50----20,605,50----
12012021,605,6021,607,6020,605,5023,007,0020,605,5023,007,00
130130--------23,106,00----23,106,00----
14014024,605,6024,607,6023,106,0025,007,0023,106,0025,007,00
15015024,606,6024,608,6026,907,00----26,907,00----
16016028,007,5028,009,0026,907,0027,007,0026,907,0027,007,00
170170--------26,907,00----26,907,00----
18018030,008,0030,0010,0030,908,0033,0010,0030,908,0033,0010,00
19019031,007,5031,009,0030,908,00----30,908,00----
20020035,007,5035,009,5030,908,0035,0010,0030,908,0035,0010,00
210210--------35,408,00----35,408,00----
22022035,007,5035,009,5035,408,0037,0010,0035,408,0037,0010,00
230230--------35,408,00----35,408,00----
24024038,007,5038,009,5035,408,0039,0010,0035,408,0039,0010,00
25025038,007,5038,009,5038,208,5040,0010,0038,208,5040,0010,00
26026040,008,0040,0010,0038,208,50------------
28028042,009,0042,0011,0043,309,0043,0010,0043,309,0043,0010,00
30030045,0010,5045,0011,0043,309,0045,0010,0043,309,0045,0010,00
32032048,0010,5048,0011,0043,309,0048,0010,0043,309,0048,0010,00
33033050,0011,00----53,5011,5048,0010,0053,509,0048,0010,00
35035052,0011,0052,0011,5053,5011,5050,0010,0053,5011,5050,0010,00
38038055,0010,3055,0011,5060,5011,5056,0013,0060,5011,5056,0013,00
40040058,0010,8058,0011,5060,5011,5058,0013,0060,5011,5058,0013,00
42042062,0012,0062,0014,3060,5011,50------------
43043062,0012,0062,0014,3060,5011,5061,0013,00--------
440440--------65,5011,50------------
45045064,0011,6064,0014,3065,5011,5063,0013,00--------
48048068,4011,6068,4014,3065,5011,5066,0013,00--------
50050069,3011,6069,3014,3072,5011,5070,0014,00--------
530530------------73,0014,00--------
55055075,4013,3075,4015,3072,5011,5075,0014,00--------
58058078,4013,3078,4015,30----78,0014,00--------
60060080,4013,3080,4015,3079,3011,5080,0014,00--------
630630------------83,0014,00--------
65065085,4013,0085,4015,3084,5011,5085,0014,00--------
68068091,5013,7091,5016,00----90,0016,00--------
70070092,0013,0092,0015,3089,5011,5092,0016,00--------
75075099,0014,0099,0015,3094,5011,5097,0016,00--------
800800104,0015,00104,0016,3099,5011,50105,0018,00--------
850850109,0014,80----105,5013,50110,0018,00--------
900900114,0014,80----111,5013,50115,0018,00--------
950950120,3015,80----116,5013,50120,0018,00--------
1001000123,3015,80----119,5013,50125,0018,00--------
Tipo 21Tipo 31
DØ (Imperial)DØ (métrico)Código de tallaD1L1D1L1
enmmenmmenmmenmm
0,3751000950,96924,600,3448,740,81220,620,3127,93
1201201,09427,790,3448,74--------
0,50001271,09427,790,3448,74125,10,3127,93
0,6251601581,21930,950,40610,321,2531,750,40510,28
18*01801,34434,150,40610,32--------
0,7501901911,34434,150,40610,321,37534,930,40510,28
20*02001,40635,700,40610,32--------
0,8752202221,46937,300,40610,321,538,10,40610,32
1.0002502541,59440,500,40610,321,62541,280,43711,1
2802801,87547,630,47211,99--------
1,12502861,87547,630,47211,991,7544,440,43711,1
30*03002.00050,800,47211,99--------
1,2503203172.00050,800,47211,991,87547,630,43711,1
33*03302,12553,980,47211,99--------
1,3753503492,12553,980,47211,99250,80,43711,1
1.5003803812,25057,150,47211,992,12553,980,43711,1
40*04002,37560,330,47211,99--------
1,62504122,37560,330,47211,992,37560,330,512,7
43*04302.50063,500,47211,99--------
1,7504504442.50063,500,47211,992,563,50,512,7
1,8754804762,62566,680,47211,992,62566,680,512,7
5005002,75069,850,53113,50--------
2.00005082,75069,850,53113,502,7569,850,512,7
5305302,87573,030,53113,50--------
2,12505392,87573,030,53113,50376,20,56214,28
55*05503.00076,200,53113,50--------
2,25005713.00076,200,53113,503,12579,380,56214,28
2,3756006033,12579,380,53113,503,2582,550,56214,28
2.50006353,25082,550,53113,503,37585,730,56214,28
65*06503,62592,080,62515,88--------
2,62506663,62592,080,62515,883,37585,730,62515,88
2,7507006983,75095,250,62515,883.588,90,62515,88
2,87507303,87598,430,62515,883,7595,250,62515,88
75*07504.000101,600,62515,88--------
3.00007624.000101,600,62515,883,87598,430,62515,88
3,125*80*07944,375111,130,78319,884101,60,78319,88
3,250*08254,500114,300,78319,884,125104,780,78319,88
3,375*85*08574,625117,480,78319,884,25107,950,78319,88
3.500*90*08894,750120,650,78319,884,375111,130,78319,88
3,625*09214,875123,830,78319,884,5114,30,78319,88
3,750*95*09535.000127,000,78319,884,625117,480,78319,88
3,875*09845,125130,170,78319,88--------
100*10004,875123,830,78319,88--------
4.000*10165,250133,350,78319,884,875123,830,78319,88
DØ (Imperial)Código de tallaD2D3L1L2Ranura P.C.D.Tamaño del anillo en O
enmmenmmenmmenmmenmm
0,500*01270,54313,800,99625,300,3117,900,0982,500,78019,80BS214
0,625*01580,66916,981,24631,650,40610,300,0982,500,95324,20BS218
0,750*01910,79320,151,37134,820,40610,300,0982,501,09327,75BS220
0,875*02220,91923,331,49638,000,40610,300,0982,501,22031,00BS222
1.00002541,04326,501,62141,180,43911,150,0982,501,34334,10BS223
1,12502861,18430,081,74644,350,43911,150,0982,501,46937,30BS224
1,25003171,30933,251,87147,530,43911,150,0982,501,59440,50BS225
1,37503491,43436,431,99650,700,43911,150,0982,501,71743,60BS226
1.50003811,55939,602,12153,880,43911,150,0982,501,84346,80BS227
1,62504121,68442,782,37160,230,50212,750,1183,002,03151,60BS229
1,75004441,80945,952,49663,400,50212,750,1183,00215754,80BS230
1,87504761,93449,132,62166,580,50212,750,1183,00228057,90BS231
2.00005082,05952,302,74669,750,50212,750,1183,002,40661,10BS232
2,12505392,18455,482,99676,100,56414,330,1383,502,59465,90BS234
2,25005712,30958,653,12179,280,56414,330,1383,502,71769,00BS235
2,37506032,43461,833,24682,450,56414,330,1383,502,84372,20BS236
2.50006352,55965,003,37185,630,56414,330,1383,502,96975,40BS237
2,62506662,68468,183,37185,630,62715,930,1383,503,03177,00BS237
2,75006982,80971,353,49688,800,62715,930,1383,503,15780,20BS238
2,87507302,93474,533,74695,150,62715,930,1383,503,34384,90BS240
3.00007623,05977,703,87198,330,62715,930,1383,503,46988,10BS241
3,125*07943,22581,923,996101,500,78119,840,1383,503,59491,30BS242
3,250*08253,35085,104,121104,680,78119,840,1383,503,71794,40BS243
3,375*08573,47588,274,246107,850,78119,840,1383,503,84397,60BS244
3.500*08893,60091,444,371111,030,78119,840,1383,503,969100,80BS245
3,625*09213,72594,624,496114,200,78119,840,1383,504,094104,00BS246
3,750*09533,85097,794,621117,380,78119,840,1383,504,217107,10BS247
3,875*09843,975100,974,746120,550,78119,840,1383,504,343110,30BS248
4.000*10164100104,144,871123,730,78119,840,1383,504,469113,50BS249
DØ (Imperial)Código de tallaD1D2L1L2PIN PCDPIN Ø
enmmenmmenmmenmmenmmenmm
0,500*01271.00025,400,54313,800,3137,950,1122,850,68717,460,07902,00
0,62501581,25031,750,66916,980,40510,280,1574,000,81320,640,07902,00
0,750*01911,37534,930,79220,120,40510,280,1574,000,93723,810,07902,00
0,87502221.50038,100,91923,330,40510,280,1574,001,06326,990,07902,00
1.00002541,62541,281,04326,500,43711,100,1614,101,18730,150,07902,00
1,12502861,75044,441,18430,080,43711,100,1614,101,31333,350,07902,00
1,25003171,87547,631,30933,250,43711,100,1614,101,43736,500,07902,00
1,37503492.00050,801,43536,450,43711,100,1614,101,56339,700,07902,00
1.50003812,12553,981,55939,600,43711,100,1614,101,68742,850,07902,00
1,62504122,37560,331,68442,780,50012,700,1654,201,87547,630,11803,00
1,75004442.50063,501,80945,950,50012,700,1654,202.00050,800,11803,00
1,87504762,62566,681,93449,130,50012,700,1654,202,12553,980,11803,00
2.00005082,75069,852,05952,300,50012,700,1654,202,25057,150,11803,00
2,12505393.00076,202,18455,480,56214,280,1774,502,37560,330,11803,00
2,25005713,12579,382,30958,650,56214,280,1774,502.50063,500,11803,00
2,37506033,25082,552,43861,930,56214,280,1774,502,62566,680,11803,00
2.50006353,37585,732,55965,000,56214,280,1774,502,75069,850,11803,00
2,62506663,37585,732,68468,180,62515,880,1734,402,87573,030,11803,00
2,750*0698350088,902,80971,350,62515,880,1734,403.00076,200,11803,00
2,87507303,75095,252,93474,530,62515,880,1734,403,12579,380,11803,00
3.00007623,87598,433,05977,700,62515,880,1734,403,25082,550,11803,00
3,12507944.000101,603,22581,920,78319,880,1774,50337685,750,11803,00
3,25008254,125104,783,35085,090,78319,880,1774,50350088,900,11803,00
3,37508574,250107,953,47588,270,78319,880,1774,503,62492,050,11803,00
350008894,375111,133,60091,440,78319,880,1774,503,75095,250,11803,00
3,62509214,500114,303,72594,620,78319,880,1774,503,87498,400,11803,00
3,75009534,625117,483,85097,790,78319,880,1774,504.000101,600,11803,00
3,87509844,750120,653,975100,970,78319,880,1774,504,125104,780,11803,00
4.00010164,875123,834100104,140,78319,880,1774,504,250107,950,11803,00
DØ (Imperial)DØ (métrico)Código de tallaTipo 11Tipo 20Tipo 19BTipo 24
D1L1D1L1D1L1D1L1
enmmenmmenmmenmm
0,37500950,87522,230,3127,930,96924,60,3448,74--------
1001000,87522,230,3127,930,96924,60,3448,7421,006,6021,008,60
1201201.00025,400,3127,931,09427,790,3448,7423,006,6023,008,60
0,50001271.00025,400,3127,931,09427,790,3448,74--------
1301301.00025,400,3127,931,09427,790,3448,74--------
1401401,25031,750,40510,281,21930,950,40610,3225,006,6025,008,60
150150--------1,21930,950,40610,3227,006,6027,008,60
0,62501581,25031,750,40510,281,21930,950,40610,32--------
1601601,25031,750,40510,281,21930,950,40610,3227,006,6027,008,60
1801801,37534,930,40510,281,34434,150,40610,3233,007,5033,0010,00
0,75001911,37534,930,40510,281,34434,150,40610,32--------
2002001.50038,100,40510,281,40635,70,40610,3235,007,5035,0010,00
2202201.50038,100,40510,281,46937,30,40610,3237,007,5037,0010,00
0,87502221.50038,100,40510,281,46937,30,40610,32--------
2402401,62541,280,43711,101,59440,50,40610,3239,007,5039,0010,00
2502501,62541,280,43711,101,59440,50,40610,3240,007,5040,0010,00
102541,62541,280,43711,101,59440,50,40610,32--------
2802801,75044,440,43711,101,87547,630,47211,9943,007,5043,0010,00
1,12502861,75044,440,43711,101,87547,630,47211,99--------
3003001,87547,630,43711,10250,80,47211,9945,007,5045,0010,00
1,25003171,87547,630,43711,10250,80,47211,99--------
3203201,87547,630,43711,10250,80,47211,9948,007,5048,0010,00
3303302.00050,800,43711,102,12553,980,47211,9948,007,5048,0010,00
1,3753503502.00050,800,43711,102,12553,980,47211,9950,007,5050,0010,00
1.5003803802,12553,980,43711,102,2557,150,47211,9956,009,0056,0011,00
4004002,37560,330,50012,702,37560,330,47211,9958,009,0058,0011,00
1,62504122,37560,330,50012,702,37560,330,47211,99--------
4304302.50063,500,50012,702,563,50,47211,9961,009,0061,0011,00
1,75004442.50063,500,50012,702,563,50,47211,99--------
4504502,62566,680,50012,702,563,50,47211,9963,009,0063,0011,00
1,87504762,62566,680,50012,702,62566,680,47211,99--------
4804802,75069,850,50012,702,62566,680,47211,9966,009,0066,0011,00
5005002,75069,850,50012,702,7569,850,53113,570,009,5070,0013,00
205082,75069,850,50012,702,7569,850,53113,5--------
5305303.00076,200,56214,282,87573,030,53113,573,0011,0073,0013,00
2,12505393.00076,200,56214,282,87573,030,53113,5--------
5505503,12579,380,56214,28376,20,53113,575,0011,0075,0013,00
2,25005713,12579,380,56214,28376,20,53113,5--------
5805803,25082,550,56214,283,12579,380,53113,578,0011,0078,0013,00
6006003,25082,550,56214,283,12579,380,53113,580,0011,0080,0013,00
2,37506033,25082,550,56214,283,12579,380,53113,5--------
6306303,37585,730,56214,283,2582,550,53113,5----83,0013,00
2,506353,37585,730,56214,283,2582,550,53113,5--------
6506503,37585,730,62515,883,62592,080,62515,8885,0011,0085,0013,00
2,6256663,37585,730,62515,883,62592,080,62515,88--------
2,750698350088,900,62515,883,7595,250,62515,88--------
70700350088,900,62515,883,7595,250,62515,8892,0011,3092,0015,30
2,8757303,75095,250,62515,883,87598,430,62515,88--------
757503,87598,430,62515,884101,60,62515,8897,0011,3097,0015,30
3.0007623,87598,430,62515,884101,60,62515,88--------
3,1257944.000101,600,78319,884,375111,130,78319,88--------
80800--------4,5114,30,78319,88105,0012,00105,0015,70
3,2508254,125104,780,78319,884,5114,30,78319,88--------
DØ (métrico)Código de tallaD1D4DIN/DINL L1Ancho de ranura DINLProfundidad de ranura DINL
10010021,0016,428,604,005,00
12012023,0018,428,604,005,00
14014025,0020,428,604,005,00
16016027,0022,428,604,005,00
18018033,0026,610,004,005,50
20020035,0028,610,004,005,50
22022037,0030,610,004,005,50
24024039,0032,610,004,005,50
25025040,0033,610,004,005,50
28028043,0036,610,004,005,50
30030045,0038,610,004,005,50
32032048,0041,6610,004,005,50
33033048,0041,6610,004,005,50
35035050,0043,810,004,005,50
38038056,0048,811,005,005,50
40040058,0050,811,005,005,50
43043061,0053,811,005,005,50
45045063,0055,811,005,005,50
48048066,0058,811,005,005,50
50050070,0061,2513,005,005,50
53053073,0064,2513,005,005,50
55055075,0066,2513,005,005,50
58058078,0069,2513,005,005,50
60060080,0071,2513,005,005,50
63063083,0074,2513,005,005,50
65065085,0076,2513,005,005,50
68068090,0080,515,305,005,50
70070092,0082,615,305,005,50
75075097,0087,615,305,005,50
800800105,0094,715,705,005,50
850850110,0099,715,705,005,50
900900115,00104,715,705,005,50
950950120,00109,715,705,005,50
1001000125,00114,715,705,005,50
DØ (Imperial)DØ (métrico)Código de tallaD1D2D3L1L2
enmmenmmenmmenmmenmm
0,5001201271,14429,050,53913,701,56339,700,68517,400,3117,90
1501501,25631,900,63016,001,61441,000,68517,400,3117,90
0,6251601581,30133,040,66116,801,72043,690,68517,400,3117,90
0,7501901911,42636,210,78720,001,83146,500,68517,400,3117,90
2002001,45336,900,82721,001,85047,000,68517,400,3117,90
0,8752202221,55139,390,91323,201,94949,500,68517,400,3117,90
2502501,65041,901,02426,002,04752,000,68517,400,3117,90
1.00002541,67642,561,03926,402,06752,500,68517,400,3117,90
1,1252802861,80145,741,16529,602,30358,501,05926,900,43711,10
3003001,91748,691,22031,002,31358,751,05926,900,43711,10
1,25003171,98850,501,28732,702.50063,501,05926,900,43711,10
33*03302,05952,301,33934,002,55965,001,05926,900,43711,10
1,3753503492,11353,681,41736,002,57965,501,05926,900,43711,10
1.500380381223856,851,53939,102,73669,501,05926,900,43711,10
4004002,43761,901,61441,002,95375,001,05926,900,43711,10
1,62504122,48863,201,66142,203,01276,501,05926,900,43711,10
1,75004442,63066,381,78745,403,13079,501,05926,900,43711,10
4504502,63466,901,81146,00315080,001,05926,900,43711,10
1,8754804762,73869,551,92949,003,24882,501,05926,900,43711,10
5005002,83171,902,00851,00334685,001,05926,900,43711,10
2.00005082,86372,732,03951,803,36685,501,05926,900,43711,10
2,12505393,11379,082,16154,903,76095,501,31233,330,56314,30
55*05503,14679,902,20556,003,78096,001,31233,330,56314,30
2,2500571323882,252,28758,103,87898,501,31233,330,56314,30
6006003,34384,902,40261,003,976101,001,31233,330,56314,30
2,3750603336300085,432,41361,303,996101,501,31233,330,56314,30
2.50006353,48888,602,53964,504,114104,501,31233,330,56314,30
65*06503,53989,90259866,004,173106,001,31233,330,56314,30
2,62506663,61391,782,66167,604,272108,501,31233,330,56314,30
2,7507006983,73694,902,79571,004,370111,001,31233,330,56314,30
2,87507303,86398,132,91374,004508114,501,31233,330,56314,30
75*07503,93399,902,99276,004,567116,001,31233,330,56314,30
3.00007623,92699,713,03977,205,547115,501,31233,330,56314,30
3,125*07944,051102,893,16580,404,705119,501,31233,330,56314,30
80*08004,130104,90318981,004,764121,001,31233,330,56314,30
3,250*08254232107,503,29583,704,862123,501,35034,300,56314,30
85*08504,327109,90338686,004,961126,001,35034,300,56314,30
3,375*08574,364110,853,42186,905,020127,501,35034,300,56314,30
3.500*08894,488114,003,53989,905138130,501,35034,300,56314,30
90*09004508114,503,58391,005138130,501,35034,300,56314,30
3,625*09214,610117,103,67393,305,256133,501,35034,300,56314,30
95*09504,720119,903,78096,005354136,001,35034,300,56314,30
3,750*09534,738120,353,79196,305374136,501,35034,300,56314,30
100*10004,917124,903,976101,005,551141,001,35034,300,56314,30
4.000*10164,988126,704,039102,605,610142,501,35034,300,56314,30
4,250*10795238133,054291109,005,886149,501,35034,300,56314,30
4,500*11435,488139,404,539115,306,122155,501,35034,300,56314,30
5.000*12706,488164,805,039128,007,3882187,501,41736,000,63016,00
5,500*13976,988177,505,539140,707,894200,501,41736,000,63016,00
This is some text inside of a div block.

Please note that the lengths and weights provided are for informational purposes only and are not contractual.

Productos equivalentes

Vulcan Seals Tip 40D es un sello mecánico de reemplazo dimensional para los siguientes rangos de sellos:

  • Burgmann® | Type HJ92/G9*
  • Burgmann® | Type HJ97/G9*
  • John Crane® | Type 50/248X*

*Cara giratoria | **Cara estacionaria

Aplicaciones adecuadas

Suitable Industries

Chemical Properties

Operating Limits

Valves - Operating Limits

Centrifugal Pumps - Operating Limits

Reciprocating Pumps - Operating Limits

Gamas de bombas

Recursos

Hoja de datos del producto
Hoja de datos del producto
Hoja de datos del producto
Hoja de datos del producto
Preparar el archivo PDF para descargarlo
Product Data Sheet
Phone : +44 (0) 114 249 3333
Email : contact@vulcanseals.com
Vulcan Seals Tipo 40D

Technical Data Sheet

Product Description

El Vulcan Seals Tipo 40D es un diseño de sello robusto, de perfil estrecho, montado en forma de anillo en forma de «O», con varios muelles y una cara giratoria insertada balanceada hidráulicamente. Los Vulcan Seals Tipo 40D cumplen totalmente con las dimensiones de la norma DIN24960/EN12756 L1K-U. La transmisión desde el eje y la longitud de trabajo de la junta se aprietan mediante tornillos de fijación con la llave Allen suministrada. Los tornillos de fijación proporcionan una capacidad de rotación bidireccional.

El conjunto de muelles múltiples y el perfil de la cara giratoria proporcionan fuerzas de cierre y equilibrio hidráulico uniformes, lo que mejora la capacidad fotovoltaica, un mayor rendimiento de sellado y una mayor vida útil del sello en aplicaciones industriales desafiantes en comparación con los diseños de sellos de un solo resorte.

El Vulcan Seals Tipo 40D se suministra con un anillo fijo tipo 24 DINL montado en un anillo en forma de «O» para la mayoría de los tamaños de eje, a fin de proporcionar un rendimiento óptimo en fluidos de alto par, como medios viscosos y con alto contenido de sólidos.

Operating Limits

¿Por qué elegir el Vulcan Seals Tipo 40D?

  • Diseño compacto avanzado con perfil radial estrecho que cumple con las cámaras de sellado DIN24960/EN12756 L1K-U con sistema antirrotación.
  • Muy adecuado para aplicaciones con alto contenido de sólidos debido a su perfil exterior liso y a los resortes protegidos de la exposición al medio.
  • El rotativo Vulcan Seals Type 40 presenta diseños de caras diferenciales para carbono y carburos de silicio o tungsteno más duros para garantizar un rendimiento óptimo.
  • Múltiples muelles para una carga frontal uniforme, aislados del producto, evitan que se obstruyan. Los muelles en C de Hastelloy® vienen de serie para ofrecer la máxima resistencia a la corrosión y una vida útil máximas.
  • La junta estática en forma de anillo en forma de «O» de mayor diámetro no se irrita ni daña el manguito del eje y se puede sellar en manguitos del eje que antes estaban ligeramente desgastados por otras juntas o empaques de prensacos.

Suitable Applications

Gland Packing Replacement Range

Vulcan Seals Tip 40D es un sello mecánico de reemplazo dimensional para los siguientes rangos de sellos:

  • Burgmann® | Type HJ92/G9*
  • Burgmann® | Type HJ97/G9*
  • John Crane® | Type 50/248X*

*Cara giratoria | **Cara estacionaria

® TM All product names, brands and trademarks shown are property of their respective owners, are for identification purposes only, and do not imply affiliation nor endorsement.**All information supplied within, has been given in good faith and in Vulcan Seals' best judgement. It is meant for guidance purposes only. Vulcan Seals reserves the right to amend all statements, dimensions and technical datawithout prior notice.
Embrace Excellence - Vulcan Service, Quality and Value
Mechanical Seals | FEP/PFA Encapsulated ‘O’-rings | Gland Packing | Expanded PTFE Gasketing
UK/World: +44 (0) 114 249 3333 | USA: +1 952 955 8800 | www.vulcanseals.com | contact@vulcanseals.com
Phone : +44 (0) 114 249 3333
Email : contact@vulcanseals.com
Vulcan Seals Tipo 40D

Technical Data Sheet

Product Description

El Vulcan Seals Tipo 40D es un diseño de sello robusto, de perfil estrecho, montado en forma de anillo en forma de «O», con varios muelles y una cara giratoria insertada balanceada hidráulicamente. Los Vulcan Seals Tipo 40D cumplen totalmente con las dimensiones de la norma DIN24960/EN12756 L1K-U. La transmisión desde el eje y la longitud de trabajo de la junta se aprietan mediante tornillos de fijación con la llave Allen suministrada. Los tornillos de fijación proporcionan una capacidad de rotación bidireccional.

El conjunto de muelles múltiples y el perfil de la cara giratoria proporcionan fuerzas de cierre y equilibrio hidráulico uniformes, lo que mejora la capacidad fotovoltaica, un mayor rendimiento de sellado y una mayor vida útil del sello en aplicaciones industriales desafiantes en comparación con los diseños de sellos de un solo resorte.

El Vulcan Seals Tipo 40D se suministra con un anillo fijo tipo 24 DINL montado en un anillo en forma de «O» para la mayoría de los tamaños de eje, a fin de proporcionar un rendimiento óptimo en fluidos de alto par, como medios viscosos y con alto contenido de sólidos.

¿Por qué elegir el Vulcan Seals Tipo 40D?

  • Diseño compacto avanzado con perfil radial estrecho que cumple con las cámaras de sellado DIN24960/EN12756 L1K-U con sistema antirrotación.
  • Muy adecuado para aplicaciones con alto contenido de sólidos debido a su perfil exterior liso y a los resortes protegidos de la exposición al medio.
  • El rotativo Vulcan Seals Type 40 presenta diseños de caras diferenciales para carbono y carburos de silicio o tungsteno más duros para garantizar un rendimiento óptimo.
  • Múltiples muelles para una carga frontal uniforme, aislados del producto, evitan que se obstruyan. Los muelles en C de Hastelloy® vienen de serie para ofrecer la máxima resistencia a la corrosión y una vida útil máximas.
  • La junta estática en forma de anillo en forma de «O» de mayor diámetro no se irrita ni daña el manguito del eje y se puede sellar en manguitos del eje que antes estaban ligeramente desgastados por otras juntas o empaques de prensacos.

Pump Ranges

Standard Face Material Combinations

Dimensional Data

Texto debajo de la tabla de datos dimensionales
® TM All product names, brands and trademarks shown are property of their respective owners, are for identification purposes only, and do not imply affiliation nor endorsement.**All information supplied within, has been given in good faith and in Vulcan Seals' best judgement. It is meant for guidance purposes only. Vulcan Seals reserves the right to amend all statements, dimensions and technical datawithout prior notice.
Embrace Excellence - Vulcan Service, Quality and Value
Mechanical Seals | FEP/PFA Encapsulated ‘O’-rings | Gland Packing | Expanded PTFE Gasketing
UK/World: +44 (0) 114 249 3333 | USA: +1 952 955 8800 | www.vulcanseals.com | contact@vulcanseals.com
Phone : +44 (0) 114 249 3333
Email : contact@vulcanseals.com
Vulcan Seals Tipo 40D

Technical Data Sheet

Product Description

El Vulcan Seals Tipo 40D es un diseño de sello robusto, de perfil estrecho, montado en forma de anillo en forma de «O», con varios muelles y una cara giratoria insertada balanceada hidráulicamente. Los Vulcan Seals Tipo 40D cumplen totalmente con las dimensiones de la norma DIN24960/EN12756 L1K-U. La transmisión desde el eje y la longitud de trabajo de la junta se aprietan mediante tornillos de fijación con la llave Allen suministrada. Los tornillos de fijación proporcionan una capacidad de rotación bidireccional.

El conjunto de muelles múltiples y el perfil de la cara giratoria proporcionan fuerzas de cierre y equilibrio hidráulico uniformes, lo que mejora la capacidad fotovoltaica, un mayor rendimiento de sellado y una mayor vida útil del sello en aplicaciones industriales desafiantes en comparación con los diseños de sellos de un solo resorte.

El Vulcan Seals Tipo 40D se suministra con un anillo fijo tipo 24 DINL montado en un anillo en forma de «O» para la mayoría de los tamaños de eje, a fin de proporcionar un rendimiento óptimo en fluidos de alto par, como medios viscosos y con alto contenido de sólidos.

¿Por qué elegir el Vulcan Seals Tipo 40D?

  • Diseño compacto avanzado con perfil radial estrecho que cumple con las cámaras de sellado DIN24960/EN12756 L1K-U con sistema antirrotación.
  • Muy adecuado para aplicaciones con alto contenido de sólidos debido a su perfil exterior liso y a los resortes protegidos de la exposición al medio.
  • El rotativo Vulcan Seals Type 40 presenta diseños de caras diferenciales para carbono y carburos de silicio o tungsteno más duros para garantizar un rendimiento óptimo.
  • Múltiples muelles para una carga frontal uniforme, aislados del producto, evitan que se obstruyan. Los muelles en C de Hastelloy® vienen de serie para ofrecer la máxima resistencia a la corrosión y una vida útil máximas.
  • La junta estática en forma de anillo en forma de «O» de mayor diámetro no se irrita ni daña el manguito del eje y se puede sellar en manguitos del eje que antes estaban ligeramente desgastados por otras juntas o empaques de prensacos.

Mechanical Seal Replacement Range

Vulcan Seals Tip 40D es un sello mecánico de reemplazo dimensional para los siguientes rangos de sellos:

  • Burgmann® | Type HJ92/G9*
  • Burgmann® | Type HJ97/G9*
  • John Crane® | Type 50/248X*

*Cara giratoria | **Cara estacionaria

® TM All product names, brands and trademarks shown are property of their respective owners, are for identification purposes only, and do not imply affiliation nor endorsement.**All information supplied within, has been given in good faith and in Vulcan Seals' best judgement. It is meant for guidance purposes only. Vulcan Seals reserves the right to amend all statements, dimensions and technical datawithout prior notice.
Embrace Excellence - Vulcan Service, Quality and Value
Mechanical Seals | FEP/PFA Encapsulated ‘O’-rings | Gland Packing | Expanded PTFE Gasketing
UK/World: +44 (0) 114 249 3333 | USA: +1 952 955 8800 | www.vulcanseals.com | contact@vulcanseals.com

Dimensional Data

DØ (métrico)Código de tallaD1D4DINS L1DINL L2Ancho de ranura DINLProfundidad de ranura DINL
10010021,0016,426,6010,004,005,00
12012023,0018,426,6010,004,005,00
14014025,0020,426,6010,004,005,00
16016027,0022,426,6010,004,005,00
18018033,0026,67,5011,504,005,50
20020035,0028,67,5011,504,005,50
22022037,0030,67,5011,504,005,50
24024039,0032,67,5011,504,005,50
25025040,0033,67,5011,504,005,50
28028043,0036,67,5011,504,005,50
30030045,0038,67,5011,504,005,50
32032048,0041,667,5011,504,005,50
33033048,0041,667,5011,504,005,50
35035050,0043,87,5011,504,005,50
38038056,0048,89,0014,005,005,50
40040058,0050,89,0014,005,005,50
43043061,0053,89,0014,005,005,50
45045063,0055,89,0014,005,005,50
48048066,0058,89,0014,005,005,50
50050070,0061,259,5015,005,005,50
53053073,0064,2511,0015,005,005,50
55055075,0066,2511,0015,005,005,50
58058078,0069,2511,0015,005,005,50
60060080,0071,2511,0015,005,005,50
63063083,0074,2511,0015,005,005,50
65065085,0076,2511,0015,005,005,50
68068090,0080,511,3018,005,005,50
70070092,0082,611,3018,005,005,50
75075097,0087,611,3018,005,005,50
800800105,0094,712,0018,205,005,50
850850110,0099,714,0018,205,005,50
900900115,00104,714,0018,205,005,50
950950120,00109,714,0017,205,005,50
1001000125,00114,714,0017,205,005,50
DØ (Imperial)DØ (métrico)Código de tallaD3L1No de tornillos de fijación
enmmenmm
0,37500950,74819,000,2957,503 x 120°
1001000,74819,000,2957,503 x 120°
1201200,82721,000,2957,503 x 120°
0,501270,82721,000,2957,503 x 120°
1401400,90623,000,2957,503 x 120°
1501500,94524,000,2957,503 x 120°
0,62501580,98425,000,2957,503 x 120°
1601600,98425,000,2957,503 x 120°
1801801,2231,000,2957,503 x 120°
0,7501911,2231,000,2957,503 x 120°
2002001,29933,000,2957,503 x 120°
2202201,37835,000,2957,503 x 120°
0,87502221,37835,000,2957,503 x 120°
2402401,45737,000,2957,503 x 120°
2502501,49638,000,34910,003 x 120°
102541,49638,000,34910,003 x 120°
2802801,61441,000,34910,003 x 120°
1,12502861,61441,000,34910,003 x 120°
3003001,69343,000,34910,003 x 120°
1,2503171,77245,000,34910,003 x 120°
3203201,77245,000,39410,003 x 120°
3303301,81146,000,39410,003 x 120°
1,37503491,8948,000,39410,003 x 120°
3503501,8948,000,39410,003 x 120°
3803802,08753,000,39410,003 x 120°
1,503812,08753,000,39410,003 x 120°
4004002,16555,000,39410,003 x 120°
1,62504122,16555,000,39410,003 x 120°
4304302,28358,000,39410,003 x 120°
1,7504442,36260,000,39410,003 x 120°
4504502,36260,000,39410,003 x 120°
1,87504762,4863,000,39410,003 x 120°
DØ (Imperial)DØ (métrico)Código de tallaD3L1No de tornillos de fijación
enmmenmm
484802,4863,000,39410,003 x 120°
505002,55965,000,39410,003 x 120°
2.0005082,55965,000,39410,003 x 120°
535302,67768,000,39410,003 x 120°
2,1255392,67768,000,39410,003 x 120°
555502,75670,000,39410,003 x 120°
2,2505712,75670,000,39410,003 x 120°
585803,03177,000,39410,003 x 120°
606003,1179,000,39410,003 x 120°
2,3756033,1179,000,39410,003 x 120°
2.5006353,22882,000,39410,003 x 120°
656503,30784,000,47212,003 x 120°
2,6256663,30784,000,47212,003 x 120°
686803,42587,000,47212,003 x 120°
2,7506983,50489,000,47212,003 x 120°
707003,50489,000,47212,003 x 120°
2,8757303,7495,000,47212,003 x 120°
757503,85898,000,47212,003 x 120°
3.0007623,85898,000,47212,003 x 120°
3,1257944,055103,000,47212,003 x 120°
808004,055103,000,47212,003 x 120°
3,2508254,055103,000,47212,003 x 120°
858504,252108,000,47212,003 x 120°
3,3758574,252108,000,47212,003 x 120°
35008894,449113,000,47212,003 x 120°
909004,449113,000,47212,003 x 120°
3,625*9214,449113,000,47212,003 x 120°
95*9504,646118,000,47212,003 x 120°
3,750*9534,646118,000,47212,003 x 120°
3,875*9844,764121,000,47212,003 x 120°
100*10004,843123,000,47212,003 x 120°
4.000*10164,843123,000,5915,003 x 120°
DØ (métrico)Código de tallaTipo 8STDTipo 8BTipo 12Tipo 12DINTipo 13Tipo 13DIN
D1L1D1L1D1L1D1L1D1L1
10010019,206,6019,207,1018,105,5021,007,0018,105,5021,007,00
110110--------20,605,50----20,605,50----
12012021,605,6021,607,6020,605,5023,007,0020,605,5023,007,00
130130--------23,106,00----23,106,00----
14014024,605,6024,607,6023,106,0025,007,0023,106,0025,007,00
15015024,606,6024,608,6026,907,00----26,907,00----
16016028,007,5028,009,0026,907,0027,007,0026,907,0027,007,00
170170--------26,907,00----26,907,00----
18018030,008,0030,0010,0030,908,0033,0010,0030,908,0033,0010,00
19019031,007,5031,009,0030,908,00----30,908,00----
20020035,007,5035,009,5030,908,0035,0010,0030,908,0035,0010,00
210210--------35,408,00----35,408,00----
22022035,007,5035,009,5035,408,0037,0010,0035,408,0037,0010,00
230230--------35,408,00----35,408,00----
24024038,007,5038,009,5035,408,0039,0010,0035,408,0039,0010,00
25025038,007,5038,009,5038,208,5040,0010,0038,208,5040,0010,00
26026040,008,0040,0010,0038,208,50------------
28028042,009,0042,0011,0043,309,0043,0010,0043,309,0043,0010,00
30030045,0010,5045,0011,0043,309,0045,0010,0043,309,0045,0010,00
32032048,0010,5048,0011,0043,309,0048,0010,0043,309,0048,0010,00
33033050,0011,00----53,5011,5048,0010,0053,509,0048,0010,00
35035052,0011,0052,0011,5053,5011,5050,0010,0053,5011,5050,0010,00
38038055,0010,3055,0011,5060,5011,5056,0013,0060,5011,5056,0013,00
40040058,0010,8058,0011,5060,5011,5058,0013,0060,5011,5058,0013,00
42042062,0012,0062,0014,3060,5011,50------------
43043062,0012,0062,0014,3060,5011,5061,0013,00--------
440440--------65,5011,50------------
45045064,0011,6064,0014,3065,5011,5063,0013,00--------
48048068,4011,6068,4014,3065,5011,5066,0013,00--------
50050069,3011,6069,3014,3072,5011,5070,0014,00--------
530530------------73,0014,00--------
55055075,4013,3075,4015,3072,5011,5075,0014,00--------
58058078,4013,3078,4015,30----78,0014,00--------
60060080,4013,3080,4015,3079,3011,5080,0014,00--------
630630------------83,0014,00--------
65065085,4013,0085,4015,3084,5011,5085,0014,00--------
68068091,5013,7091,5016,00----90,0016,00--------
70070092,0013,0092,0015,3089,5011,5092,0016,00--------
75075099,0014,0099,0015,3094,5011,5097,0016,00--------
800800104,0015,00104,0016,3099,5011,50105,0018,00--------
850850109,0014,80----105,5013,50110,0018,00--------
900900114,0014,80----111,5013,50115,0018,00--------
950950120,3015,80----116,5013,50120,0018,00--------
1001000123,3015,80----119,5013,50125,0018,00--------
Tipo 21Tipo 31
DØ (Imperial)DØ (métrico)Código de tallaD1L1D1L1
enmmenmmenmmenmm
0,3751000950,96924,600,3448,740,81220,620,3127,93
1201201,09427,790,3448,74--------
0,50001271,09427,790,3448,74125,10,3127,93
0,6251601581,21930,950,40610,321,2531,750,40510,28
18*01801,34434,150,40610,32--------
0,7501901911,34434,150,40610,321,37534,930,40510,28
20*02001,40635,700,40610,32--------
0,8752202221,46937,300,40610,321,538,10,40610,32
1.0002502541,59440,500,40610,321,62541,280,43711,1
2802801,87547,630,47211,99--------
1,12502861,87547,630,47211,991,7544,440,43711,1
30*03002.00050,800,47211,99--------
1,2503203172.00050,800,47211,991,87547,630,43711,1
33*03302,12553,980,47211,99--------
1,3753503492,12553,980,47211,99250,80,43711,1
1.5003803812,25057,150,47211,992,12553,980,43711,1
40*04002,37560,330,47211,99--------
1,62504122,37560,330,47211,992,37560,330,512,7
43*04302.50063,500,47211,99--------
1,7504504442.50063,500,47211,992,563,50,512,7
1,8754804762,62566,680,47211,992,62566,680,512,7
5005002,75069,850,53113,50--------
2.00005082,75069,850,53113,502,7569,850,512,7
5305302,87573,030,53113,50--------
2,12505392,87573,030,53113,50376,20,56214,28
55*05503.00076,200,53113,50--------
2,25005713.00076,200,53113,503,12579,380,56214,28
2,3756006033,12579,380,53113,503,2582,550,56214,28
2.50006353,25082,550,53113,503,37585,730,56214,28
65*06503,62592,080,62515,88--------
2,62506663,62592,080,62515,883,37585,730,62515,88
2,7507006983,75095,250,62515,883.588,90,62515,88
2,87507303,87598,430,62515,883,7595,250,62515,88
75*07504.000101,600,62515,88--------
3.00007624.000101,600,62515,883,87598,430,62515,88
3,125*80*07944,375111,130,78319,884101,60,78319,88
3,250*08254,500114,300,78319,884,125104,780,78319,88
3,375*85*08574,625117,480,78319,884,25107,950,78319,88
3.500*90*08894,750120,650,78319,884,375111,130,78319,88
3,625*09214,875123,830,78319,884,5114,30,78319,88
3,750*95*09535.000127,000,78319,884,625117,480,78319,88
3,875*09845,125130,170,78319,88--------
100*10004,875123,830,78319,88--------
4.000*10165,250133,350,78319,884,875123,830,78319,88
DØ (Imperial)Código de tallaD2D3L1L2Ranura P.C.D.Tamaño del anillo en O
enmmenmmenmmenmmenmm
0,500*01270,54313,800,99625,300,3117,900,0982,500,78019,80BS214
0,625*01580,66916,981,24631,650,40610,300,0982,500,95324,20BS218
0,750*01910,79320,151,37134,820,40610,300,0982,501,09327,75BS220
0,875*02220,91923,331,49638,000,40610,300,0982,501,22031,00BS222
1.00002541,04326,501,62141,180,43911,150,0982,501,34334,10BS223
1,12502861,18430,081,74644,350,43911,150,0982,501,46937,30BS224
1,25003171,30933,251,87147,530,43911,150,0982,501,59440,50BS225
1,37503491,43436,431,99650,700,43911,150,0982,501,71743,60BS226
1.50003811,55939,602,12153,880,43911,150,0982,501,84346,80BS227
1,62504121,68442,782,37160,230,50212,750,1183,002,03151,60BS229
1,75004441,80945,952,49663,400,50212,750,1183,00215754,80BS230
1,87504761,93449,132,62166,580,50212,750,1183,00228057,90BS231
2.00005082,05952,302,74669,750,50212,750,1183,002,40661,10BS232
2,12505392,18455,482,99676,100,56414,330,1383,502,59465,90BS234
2,25005712,30958,653,12179,280,56414,330,1383,502,71769,00BS235
2,37506032,43461,833,24682,450,56414,330,1383,502,84372,20BS236
2.50006352,55965,003,37185,630,56414,330,1383,502,96975,40BS237
2,62506662,68468,183,37185,630,62715,930,1383,503,03177,00BS237
2,75006982,80971,353,49688,800,62715,930,1383,503,15780,20BS238
2,87507302,93474,533,74695,150,62715,930,1383,503,34384,90BS240
3.00007623,05977,703,87198,330,62715,930,1383,503,46988,10BS241
3,125*07943,22581,923,996101,500,78119,840,1383,503,59491,30BS242
3,250*08253,35085,104,121104,680,78119,840,1383,503,71794,40BS243
3,375*08573,47588,274,246107,850,78119,840,1383,503,84397,60BS244
3.500*08893,60091,444,371111,030,78119,840,1383,503,969100,80BS245
3,625*09213,72594,624,496114,200,78119,840,1383,504,094104,00BS246
3,750*09533,85097,794,621117,380,78119,840,1383,504,217107,10BS247
3,875*09843,975100,974,746120,550,78119,840,1383,504,343110,30BS248
4.000*10164100104,144,871123,730,78119,840,1383,504,469113,50BS249
DØ (Imperial)Código de tallaD1D2L1L2PIN PCDPIN Ø
enmmenmmenmmenmmenmmenmm
0,500*01271.00025,400,54313,800,3137,950,1122,850,68717,460,07902,00
0,62501581,25031,750,66916,980,40510,280,1574,000,81320,640,07902,00
0,750*01911,37534,930,79220,120,40510,280,1574,000,93723,810,07902,00
0,87502221.50038,100,91923,330,40510,280,1574,001,06326,990,07902,00
1.00002541,62541,281,04326,500,43711,100,1614,101,18730,150,07902,00
1,12502861,75044,441,18430,080,43711,100,1614,101,31333,350,07902,00
1,25003171,87547,631,30933,250,43711,100,1614,101,43736,500,07902,00
1,37503492.00050,801,43536,450,43711,100,1614,101,56339,700,07902,00
1.50003812,12553,981,55939,600,43711,100,1614,101,68742,850,07902,00
1,62504122,37560,331,68442,780,50012,700,1654,201,87547,630,11803,00
1,75004442.50063,501,80945,950,50012,700,1654,202.00050,800,11803,00
1,87504762,62566,681,93449,130,50012,700,1654,202,12553,980,11803,00
2.00005082,75069,852,05952,300,50012,700,1654,202,25057,150,11803,00
2,12505393.00076,202,18455,480,56214,280,1774,502,37560,330,11803,00
2,25005713,12579,382,30958,650,56214,280,1774,502.50063,500,11803,00
2,37506033,25082,552,43861,930,56214,280,1774,502,62566,680,11803,00
2.50006353,37585,732,55965,000,56214,280,1774,502,75069,850,11803,00
2,62506663,37585,732,68468,180,62515,880,1734,402,87573,030,11803,00
2,750*0698350088,902,80971,350,62515,880,1734,403.00076,200,11803,00
2,87507303,75095,252,93474,530,62515,880,1734,403,12579,380,11803,00
3.00007623,87598,433,05977,700,62515,880,1734,403,25082,550,11803,00
3,12507944.000101,603,22581,920,78319,880,1774,50337685,750,11803,00
3,25008254,125104,783,35085,090,78319,880,1774,50350088,900,11803,00
3,37508574,250107,953,47588,270,78319,880,1774,503,62492,050,11803,00
350008894,375111,133,60091,440,78319,880,1774,503,75095,250,11803,00
3,62509214,500114,303,72594,620,78319,880,1774,503,87498,400,11803,00
3,75009534,625117,483,85097,790,78319,880,1774,504.000101,600,11803,00
3,87509844,750120,653,975100,970,78319,880,1774,504,125104,780,11803,00
4.00010164,875123,834100104,140,78319,880,1774,504,250107,950,11803,00
DØ (Imperial)DØ (métrico)Código de tallaTipo 11Tipo 20Tipo 19BTipo 24
D1L1D1L1D1L1D1L1
enmmenmmenmmenmm
0,37500950,87522,230,3127,930,96924,60,3448,74--------
1001000,87522,230,3127,930,96924,60,3448,7421,006,6021,008,60
1201201.00025,400,3127,931,09427,790,3448,7423,006,6023,008,60
0,50001271.00025,400,3127,931,09427,790,3448,74--------
1301301.00025,400,3127,931,09427,790,3448,74--------
1401401,25031,750,40510,281,21930,950,40610,3225,006,6025,008,60
150150--------1,21930,950,40610,3227,006,6027,008,60
0,62501581,25031,750,40510,281,21930,950,40610,32--------
1601601,25031,750,40510,281,21930,950,40610,3227,006,6027,008,60
1801801,37534,930,40510,281,34434,150,40610,3233,007,5033,0010,00
0,75001911,37534,930,40510,281,34434,150,40610,32--------
2002001.50038,100,40510,281,40635,70,40610,3235,007,5035,0010,00
2202201.50038,100,40510,281,46937,30,40610,3237,007,5037,0010,00
0,87502221.50038,100,40510,281,46937,30,40610,32--------
2402401,62541,280,43711,101,59440,50,40610,3239,007,5039,0010,00
2502501,62541,280,43711,101,59440,50,40610,3240,007,5040,0010,00
102541,62541,280,43711,101,59440,50,40610,32--------
2802801,75044,440,43711,101,87547,630,47211,9943,007,5043,0010,00
1,12502861,75044,440,43711,101,87547,630,47211,99--------
3003001,87547,630,43711,10250,80,47211,9945,007,5045,0010,00
1,25003171,87547,630,43711,10250,80,47211,99--------
3203201,87547,630,43711,10250,80,47211,9948,007,5048,0010,00
3303302.00050,800,43711,102,12553,980,47211,9948,007,5048,0010,00
1,3753503502.00050,800,43711,102,12553,980,47211,9950,007,5050,0010,00
1.5003803802,12553,980,43711,102,2557,150,47211,9956,009,0056,0011,00
4004002,37560,330,50012,702,37560,330,47211,9958,009,0058,0011,00
1,62504122,37560,330,50012,702,37560,330,47211,99--------
4304302.50063,500,50012,702,563,50,47211,9961,009,0061,0011,00
1,75004442.50063,500,50012,702,563,50,47211,99--------
4504502,62566,680,50012,702,563,50,47211,9963,009,0063,0011,00
1,87504762,62566,680,50012,702,62566,680,47211,99--------
4804802,75069,850,50012,702,62566,680,47211,9966,009,0066,0011,00
5005002,75069,850,50012,702,7569,850,53113,570,009,5070,0013,00
205082,75069,850,50012,702,7569,850,53113,5--------
5305303.00076,200,56214,282,87573,030,53113,573,0011,0073,0013,00
2,12505393.00076,200,56214,282,87573,030,53113,5--------
5505503,12579,380,56214,28376,20,53113,575,0011,0075,0013,00
2,25005713,12579,380,56214,28376,20,53113,5--------
5805803,25082,550,56214,283,12579,380,53113,578,0011,0078,0013,00
6006003,25082,550,56214,283,12579,380,53113,580,0011,0080,0013,00
2,37506033,25082,550,56214,283,12579,380,53113,5--------
6306303,37585,730,56214,283,2582,550,53113,5----83,0013,00
2,506353,37585,730,56214,283,2582,550,53113,5--------
6506503,37585,730,62515,883,62592,080,62515,8885,0011,0085,0013,00
2,6256663,37585,730,62515,883,62592,080,62515,88--------
2,750698350088,900,62515,883,7595,250,62515,88--------
70700350088,900,62515,883,7595,250,62515,8892,0011,3092,0015,30
2,8757303,75095,250,62515,883,87598,430,62515,88--------
757503,87598,430,62515,884101,60,62515,8897,0011,3097,0015,30
3.0007623,87598,430,62515,884101,60,62515,88--------
3,1257944.000101,600,78319,884,375111,130,78319,88--------
80800--------4,5114,30,78319,88105,0012,00105,0015,70
3,2508254,125104,780,78319,884,5114,30,78319,88--------
DØ (métrico)Código de tallaD1D4DIN/DINL L1Ancho de ranura DINLProfundidad de ranura DINL
10010021,0016,428,604,005,00
12012023,0018,428,604,005,00
14014025,0020,428,604,005,00
16016027,0022,428,604,005,00
18018033,0026,610,004,005,50
20020035,0028,610,004,005,50
22022037,0030,610,004,005,50
24024039,0032,610,004,005,50
25025040,0033,610,004,005,50
28028043,0036,610,004,005,50
30030045,0038,610,004,005,50
32032048,0041,6610,004,005,50
33033048,0041,6610,004,005,50
35035050,0043,810,004,005,50
38038056,0048,811,005,005,50
40040058,0050,811,005,005,50
43043061,0053,811,005,005,50
45045063,0055,811,005,005,50
48048066,0058,811,005,005,50
50050070,0061,2513,005,005,50
53053073,0064,2513,005,005,50
55055075,0066,2513,005,005,50
58058078,0069,2513,005,005,50
60060080,0071,2513,005,005,50
63063083,0074,2513,005,005,50
65065085,0076,2513,005,005,50
68068090,0080,515,305,005,50
70070092,0082,615,305,005,50
75075097,0087,615,305,005,50
800800105,0094,715,705,005,50
850850110,0099,715,705,005,50
900900115,00104,715,705,005,50
950950120,00109,715,705,005,50
1001000125,00114,715,705,005,50
DØ (Imperial)DØ (métrico)Código de tallaD1D2D3L1L2
enmmenmmenmmenmmenmm
0,5001201271,14429,050,53913,701,56339,700,68517,400,3117,90
1501501,25631,900,63016,001,61441,000,68517,400,3117,90
0,6251601581,30133,040,66116,801,72043,690,68517,400,3117,90
0,7501901911,42636,210,78720,001,83146,500,68517,400,3117,90
2002001,45336,900,82721,001,85047,000,68517,400,3117,90
0,8752202221,55139,390,91323,201,94949,500,68517,400,3117,90
2502501,65041,901,02426,002,04752,000,68517,400,3117,90
1.00002541,67642,561,03926,402,06752,500,68517,400,3117,90
1,1252802861,80145,741,16529,602,30358,501,05926,900,43711,10
3003001,91748,691,22031,002,31358,751,05926,900,43711,10
1,25003171,98850,501,28732,702.50063,501,05926,900,43711,10
33*03302,05952,301,33934,002,55965,001,05926,900,43711,10
1,3753503492,11353,681,41736,002,57965,501,05926,900,43711,10
1.500380381223856,851,53939,102,73669,501,05926,900,43711,10
4004002,43761,901,61441,002,95375,001,05926,900,43711,10
1,62504122,48863,201,66142,203,01276,501,05926,900,43711,10
1,75004442,63066,381,78745,403,13079,501,05926,900,43711,10
4504502,63466,901,81146,00315080,001,05926,900,43711,10
1,8754804762,73869,551,92949,003,24882,501,05926,900,43711,10
5005002,83171,902,00851,00334685,001,05926,900,43711,10
2.00005082,86372,732,03951,803,36685,501,05926,900,43711,10
2,12505393,11379,082,16154,903,76095,501,31233,330,56314,30
55*05503,14679,902,20556,003,78096,001,31233,330,56314,30
2,2500571323882,252,28758,103,87898,501,31233,330,56314,30
6006003,34384,902,40261,003,976101,001,31233,330,56314,30
2,3750603336300085,432,41361,303,996101,501,31233,330,56314,30
2.50006353,48888,602,53964,504,114104,501,31233,330,56314,30
65*06503,53989,90259866,004,173106,001,31233,330,56314,30
2,62506663,61391,782,66167,604,272108,501,31233,330,56314,30
2,7507006983,73694,902,79571,004,370111,001,31233,330,56314,30
2,87507303,86398,132,91374,004508114,501,31233,330,56314,30
75*07503,93399,902,99276,004,567116,001,31233,330,56314,30
3.00007623,92699,713,03977,205,547115,501,31233,330,56314,30
3,125*07944,051102,893,16580,404,705119,501,31233,330,56314,30
80*08004,130104,90318981,004,764121,001,31233,330,56314,30
3,250*08254232107,503,29583,704,862123,501,35034,300,56314,30
85*08504,327109,90338686,004,961126,001,35034,300,56314,30
3,375*08574,364110,853,42186,905,020127,501,35034,300,56314,30
3.500*08894,488114,003,53989,905138130,501,35034,300,56314,30
90*09004508114,503,58391,005138130,501,35034,300,56314,30
3,625*09214,610117,103,67393,305,256133,501,35034,300,56314,30
95*09504,720119,903,78096,005354136,001,35034,300,56314,30
3,750*09534,738120,353,79196,305374136,501,35034,300,56314,30
100*10004,917124,903,976101,005,551141,001,35034,300,56314,30
4.000*10164,988126,704,039102,605,610142,501,35034,300,56314,30
4,250*10795238133,054291109,005,886149,501,35034,300,56314,30
4,500*11435,488139,404,539115,306,122155,501,35034,300,56314,30
5.000*12706,488164,805,039128,007,3882187,501,41736,000,63016,00
5,500*13976,988177,505,539140,707,894200,501,41736,000,63016,00
® TM All product names, brands and trademarks shown are property of their respective owners, are for identification purposes only, and do not imply affiliation nor endorsement.**All information supplied within, has been given in good faith and in Vulcan Seals' best judgement. It is meant for guidance purposes only. Vulcan Seals reserves the right to amend all statements, dimensions and technical datawithout prior notice.
Embrace Excellence - Vulcan Service, Quality and Value
Mechanical Seals | FEP/PFA Encapsulated ‘O’-rings | Gland Packing | Expanded PTFE Gasketing
UK/World: +44 (0) 114 249 3333 | USA: +1 952 955 8800 | www.vulcanseals.com | contact@vulcanseals.com

Productos relacionados

Ver todos

Nuestros productos están diseñados por expertos para cumplir y superar las expectativas de confiabilidad, cumplimiento y rendimiento.

Vulcan Seals Tipo 40J
Vista rápida
Más información
Vulcan Seals Tipo 40H
Vista rápida
Más información
Vulcan Seals Tipo 40D
Vista rápida
Más información
Vulcan Seals Tipo 1645BA
Vista rápida
Más información
Vulcan Seals Tipo 1609BSP
Vista rápida
Más información
Vulcan Seals Tipo 1609BA
Vista rápida
Más información
Burgmann® - Type HJ92/G9
John Crane® - Type 50/248X
Burgmann® - Type HJ97/G9